mod pony

[gold29]

According to the way the rules read you can run a tube frame car in mod pony.Is this right. No matter the make of motor. Looks like they would have made it 1lb. per c.c. instead of a minimum of 2200.

[catch46]

These are the rules I read no tube chassis here
1 lb per cc 2200 min

Green Valley Speedway



Official Rules for 2011

These rules are in effect and the only Official Rules

KMSA Mod Mini Stocks ”Grassroots Racing is Back”

Body:

This class is for Cars or Pickups

All body panels must be represented with a reasonable stock appearance.

You may use aluminum or fiberglass.

Must have full floor pan & firewall.

A firewall is required between the driver and the fuel cell.

A full roll cage made of at least 1.5" outside diameter .083" steel tubing that is securely attached to the chassis is required.

All cages must meet the approval of the officials.

Chassis / Suspension:

Caster / camber adjustment plates are allowed.

Ride height (screw jacks) adjustments are allowed.

Changes to the pinion angle are allowed.


Jacking bolts & coil overs are okay

Weight:

Cars must weigh a minimum of 2,200 pounds.

50Lb weight break for stock fly wheel & clutch (must have inspect. hole to claim break.

Cars must weigh 1 pound for every cc of engine displacement.

The engine displacement must be clearly posted on the hood of the car in cc's.

All weight must be attached with at least 1/2" bolt and be painted white with the proper car number on it.

Tires / Wheels:

Any tire on steel wheel will be allowed.

Rear End:

Any stock type rear end will be allowed 9 inch ok.

Driveline:

Any stock type transmission with working reverse is allowed.

A drive shaft loop is required on all rear wheel drive cars.

All drive shafts must be painted white.

No all wheel drive vehicles will be allowed.

May run front wheel drive

Engine:

Any stock 4 cylinder engines(rotaries are not considered 4 cylinder engines)

Inline 6 cylinder (Hot Shot) type cars subject to additional weight restrictions.

Engine must be located in same location as stock location.

No turbochargers will be allowed

Dry sump oiling systems will not be allowed

Any flat top piston may be used. Toyota 2tc & 3tc engine pistons may have dome pistons @ .267 in. maximum, but no other domed pistons are allowed.

Any steel rod may be used

The crankshaft must have a stock stroke

Heads:

Heads must be stock (no after market) OEM production.

Dual overhead cams are not allowed.

No more than 2 valves per cylinder are allowed.

Any competition valve job is allowed.

No aluminum Ford heads allowed.

Ford rollers are okay with 100lbs added to overall weight.

Carburetor & Intake Manifolds

Any 2 barrel carburetor up to 500 CFM will be allowed.

Only one carburetor per engine

Any type intake manifold may be used.

Fuel injection is not allowed.

Fuel:

Any fuel acceptable

[gold29]

Kinda knocks out my toyota with a 1770c.c. motor. surely dont want to weigh 2200# with it.